mirrors/x1c6-hackintosh
1
0
Fork 0
mirror of https://github.com/tylernguyen/x1c6-hackintosh.git synced 2025-02-05 01:23:14 -06:00
Code Issues Releases Activity
x1c6-hackintosh/4_README-POSTinstallation.md
Tyler Nguyen f2eeeb8965
updated 2 READMES
2018-08-16 17:44:23 -05:00

1.7 KiB
Raw Blame History

  1. Install CLOVER on the main boot EFI paritition to enable boot without the installation media.
  2. Install the following kexts in EFI/CLOVER/kexts/Other/
    FakeSMC - system support
    VoodooPS2Controller - enable support for keyboard and touchpad
  3. Using KextBeast or another kext installer, install the following kexts in L/E/ or S/L/E/. I install it in L/E/ as it allows me to differentiate between custom kexts and default Apple kexts.
    AppleALC - also inject audio layout 11 with Clover Configurator, this enables native audio. USBInjectAll - make sure to create a custom SSDT patch Guide, also refer to README-patchingACPI.md
    Lilu - support library needed by other kexts
    WhateverGreen - enable support for Intel Graphics.
    IntelMausiEthernet - enable Ethernet with the Lenovo adapter. A recommended installation even if you don't use Ethernet as it helps with battery performance.
    BrcmFirmwareRepo
    BrcmPatchRAM2 - along with BrcmFirmwareRepo, enables Bluetooth.
    FakePCIID
    FAKEPCID_Broadcom_WiFi - along with FakePCIID, enables WiFi.
    ACPIBatteryManager - along with DSDT patching, enable battery status
  4. Rebuild the kextcache with "sudo kextcache -i /"
  5. Configure system to enable iMessage, follow this Guide. Make sure to pick system definition MacBookPro 13,1 as it supports HWP for better power management.
  6. Reboot and proceed to 5_README-ACPIpatching.md