mirror of
https://github.com/tylernguyen/x1c6-hackintosh.git
synced 2025-02-05 09:33:13 -06:00
36 lines
No EOL
2.3 KiB
Markdown
36 lines
No EOL
2.3 KiB
Markdown
> ## Hardware:
|
|
### WiFi and Bluetooth:
|
|
Replace factory Intel wifi module with a macOS compatible one. Make sure that the card is of M.2 form factor. I replaced it with the BCM94360CS2 card. This works out of the box without additional kexts and has been stable for me thus far.
|
|
- The BCM94360CS2 module comes from the 2013 MacBook Air, supports BT 4.0 and 802.11a/g/n/ac. They run on eBay for <$15.
|
|
- For the BCM94360CS2 to work with the x1c6, you would also need a M.2 NGFF adapter. They run for <$10 on eBay under "BCM94360CS2 m2 adapter"
|
|
|
|
However, there exists other alternatives with better WiFi and Bluetooth standards, but require additional kexts to work:
|
|
* Dell DW1820a 802.11 AC Wireless Network & Bluetooth 4.1 LE NGFF Card! Includes Revisions:
|
|
- CV-OVW3T3
|
|
- CN-096JNT
|
|
- CN-0VW3T3
|
|
- CN-08PKF4, the "CN-08PKF4" model is reported to have the most successes, so make sure to look for that specifically.
|
|
|
|
* Lenovo 00JT493 802.11 AC Wireless Network & Bluetooth 4.1 LE NGFF Card.
|
|
* Foxcon T77H649 802.11 AC Wireless Network & Bluetooth 4.1 LE NGFF Card.
|
|
|
|
### M.2 Hard Drive Replacements:
|
|
* macOS cannot be installed on the factory installed PM981 drive. Replace macOS-incompatible factory Samsung PM981 with preferably another M.2 drive.
|
|
* NVMeFix](https://github.com/acidanthera/NVMeFix) is still in its early stage. However, it has dramtically improved NVMe power management. In my personal experience, it is no longer far from SATA power consumption. I now recommend that you go with an NVMe SSD for the faster speed.
|
|
* An additional hard drive can be installed in the WAN slot. It can be used for a cleaner dual boot experience, or simply as a backup or storage drive.
|
|
|
|
|
|
|
|
> ## BIOS:
|
|
| Main Menu | Sub 1 | Sub 2 | Sub 3 |
|
|
| --------- | ----- | ----- | ----- |
|
|
| Config | >> Security | >> Security Chip | Security Chip `DISABLED` |
|
|
| | | >> Fingerprint | Predesktop Authentication `DISABLED` |] |
|
|
| | | >> I/O Port Access | Wireless WAN `DISABLED` *ENABLED if you have a 2nd drive attached|
|
|
| | | | Fingerprint Reader `DISABLED` |
|
|
| | | >> Secure Boot Configuration | Secure Boot `DISABLED` |
|
|
| | | >> Intel SGX | Intel SGX Control `DISABLED` |
|
|
| | >> Startup | UEFI/Legacy Boot `UEFI Only` | |
|
|
| | | CSM Support `No` (per OpenCore Documentation) | |
|
|
|
|
### My Current Settings, for Reference: |