## OpenCore is better than Clover in [many ways](https://khronokernel-2.gitbook.io/opencore-vanilla-desktop-guide/). But since it is still in its infancy, OpenCore still requires a lot of time and personal confgurations to work. So even though I have posted my EFI-OpenCore folder, there are still some work which you have to do before you are able to get it working on your machine.
### Fortunately, [acidanthera](https://github.com/acidanthera) has done a great job documenting OpenCore. And while it can be greatly time consuming, I really recommend taking a look at it and starting a `config.plist` from scratch. Doing so will allow you to personalize and understand OpenCore configurations. More importantly, by starting an `config.plist` from scratch, you may catch a mistake in my own config.plist or find a better setting variable.
I do, however, understand if you are strapped for time. So here are the necessary changes to my uploaded configs that would get your machine working. In most cases, your machine should boot with OpenCore after these changes. However, if it does not. please refer to acidanthera's OpenCore documentation.
* SystemUUID: Can be generated with MacSerial or use pervious from Clover's config.plist.
* MLB: Can be generated with MacSerial or use pervious from Clover's config.plist.
* ROM: ROM must either be Apple ROM (dumped from a real Mac), or your NIC MAC address, or any random MAC address (could be just 6 random bytes) - Vit9696
* SystemSerialNumber: Can be generated with MacSerial or use pervious from Clover's config.plist.
See [`docs/5_README-other`](https://github.com/tylernguyen/x1c6-hackintosh/blob/master/docs/5_README-other.md) for more details regarding PlatformInfo settings.
`CPUFriendDataProvider` can be generated with [CPUFriendFriend](https://github.com/corpnewt/CPUFriendFriend_) or [one-key-cpufriend](https://github.com/stevezhengshiqi/one-key-cpufriend). This is especially important if you have a different CPU than mine. Even if you have the same CPU as me, you may prefer a different Energy Performance Preference (EPP) so do generate your own CPUFriendDataProvider.
It is important to keep your OpenCore config.plist properly up-to-spec, as OpenCore configurations tend to change accordingly with OpenCore versions. A good resource to check your config plist is https://opencore.slowgeek.com/.
* There are two versions. Default `config.plist` is meant who those with a modded BIOS and have made the approiate settings as detailed in [docs/1_README-HARDWAREandBIOS.md](https://github.com/tylernguyen/x1c6-hackintosh/blob/master/docs/1_README-HARDWAREandBIOS.md) while `config_unmoddedBIOS.plist` is meant for those without a modded BIOS. There are no major difference between the two aside from graphics patching. It goes without saying, the two config files are mutually exclusive, use one or the other depending on the state of your BIOS.
* Notes on kexts and ACPI patches are on the respective Add OpenCore entry. Additionally, notes on ACPI patches can be found at [docs/4_README-ACPIpatching.md](https://github.com/tylernguyen/x1c6-hackintosh/blob/master/docs/4_README-ACPIpatching.md).
*`AAPL00,override-no-connect` = EDID override to fix HDMI hotplug. Search for yours at `patches/Internal Displays/` or see [Issue #60](https://github.com/tylernguyen/x1c6-hackintosh/issues/60) to create one for your display model.
*`framebuffer-con1-enable` to enable framebuffer patching by WEG on connector 1.
*`framebuffer-con1-type` to set connector 1 type to HDMI (per IOReg)
*`framebuffer-patch-enable` tells WEG to patch framebuffer.
*`AAPL00,override-no-connect` to override EDID (dependent on display models). See `patches/Internal Displays/`. This is necessary to fix HDMI hotplug. To create your own, see [Issue #60](https://github.com/tylernguyen/x1c6-hackintosh/issues/60)
* Addtionally, `config_unmoddedBIOS.plist` constains two more variables meant to work around the stock BIOS DVMT `Pre-Allocated` being locked at `32M`.
*`AuthRestart` set to `YES`(Enables Authenticated restart for FileVault 2 so password is not required on reboot. Can be considered a security risk so optional)
I prefer OpenCanopy for its looks. However, it is completely optional and can take up space in your EFI. If you would rather use OpenCore's built in picker. Change `PickerMode` to `Builtin` and remove `OpenCanopy.efi` from `UEFI` > `Drivers`.
* OpenCore tools and utilities are removed for a clean setup and can be added when needed.
To update your OpenCore folder to my current version, simply backup your `PlatformInfo` information and move it to the new OpenCore config. Keep in mind that, depending on your setup, you may wish to keep other settings you've made so make sure to note your OpenCore `config.plist` changes as you make them.
