A modded BIOS will allow for more optimizations to be made for macOS and will overall make your hackintosh better. I am a BIOS modding novice myself, but with these instructions, I was able to mod my x1c6 BIOS in less than one hour. I fully recommend doing this for all who think themselves capable. Furthermore, the default `config.plist` for this repository is meant to accommodate a modded BIOS with appropriate settings. If you cannot mod your BIOS or is unwilling to do so, use `Vanilla BIOS.plist`.
[SPI Programmer CH341a and SOIC8 connector](https://www.amazon.com/Organizer-Socket-Adpter-Programmer-CH341A/dp/B07R5LPTYM) are needed.
Here are the steps to mod your BIOS (credits to `paranoidbashthot` and `\x`). Attempt this at your own risk.
1. Refer to [digmorepaka/thinkpad-firnware-patches](https://github.com/digmorepaka/thinkpad-firmware-patches).
2. Use `xx_80_patches-v*.txt`, I commented out WWAN patches since I do not need it.
3. [@notthebee](https://github.com/notthebee) also has a useful video to follow: https://www.youtube.com/watch?v=ce7kqUEccUM
4. Remember to **dump the vanilla twice and use `diff` to make sure things were dumped properly**, store this backup somewhere safe.
5. Confirmed working `BIOS-v1.45`, I cannot be sure about other BIOS versions. Though they will most likely work as well.
6. The modded BIOS does not need to be signed by `thinkpad-eufi-sign`. Just **remember to replace 4C 4E 56 42 42 53 45 43 FB with 4C 4E 56 42 42 53 45 43 FF on the patched BIOS.**
- The BIOS chip is located above the CPU, under the sticker shield:
7. Your BIOS chip may not be made by Winbond, but by Macronix instead. In that case, add the argument `-c MX25L12835F/MX25L12845E/MX25L12865E` to `flashrom`. See [Issue #116](https://github.com/tylernguyen/x1c6-hackintosh/issues/116#issuecomment-778654320)
- Successfully modding your BIOS will reveal the `Advance Menu` tab.
